0. 5 - 50 mbar Vacuity Feed Amount Distillation Machine for CBD / THC / Hemp oil
—— Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
| TYPE |
BML-5 |
| MATERIAL |
stainless steel 304 |
| TEMPERATURE |
Room temp~200/300 ℃(depend on the oil heater) |
| DIAMETER |
80 (mm) |
| HEAT EXCHANGER HTA |
0.058 (m2) |
| FEED AMOUNT |
2000~6000 ( ml/h) |
| ROTATION SPEED |
80-390rpm |
| FILM SYSTEM |
Wiped Filming System |
| VACUITY |
0. 5-50mbar(depend on the nature of material and vacuum pump) |
| FLOOR AREA |
length*width*height=1100*500*1750 (mm)(without pump) |
| POWER |
2KW (without pump) |
| VOLTAGE |
220V -60hz |
Versatile efficiency and application diversity.
The wiped film evaporator can be used for concentration, as well as for purification of valuable materials by distillation. It does its job successfully in:
Concentrating sensible products
Concentrating viscous fluids
Concentrating fluids with structural viscosity
Removing solvents from valuable products
Separating valuable products from heavy boiling components
Mass-transfer operations through the thin film
Special applications: reboiler for rectification column
Drying
Product Tags:
|
|
High Vacuum Distillation Machine Wiped Filming System 0.5-50 Mbar Vacuity Feed Amount Images
|
