80 - 240 l / h Feed Amount Solvent Recovery Machine for CBD / THC / Hemp oil
—— Design
Horizontal or vertical shell-and-tube heat exchanger or plate heat exchanger, with flash vessel/separator and circulation pump.
—— Particular features
Less foul – boiling/evaporation will not take place on the heating surfaces, but in the separator. Fouling due to incrustation and precipitation in the calandria is therefore
minimised.
Optimised heat exchange surface – flow velocity in the tubes determined by the circulation pump.
| TYPE |
BML-W-100 |
| MATERIAL |
stainless steel 304 |
| TEMPERATURE |
Room temp~200 ℃(oil heating not included ) |
| DIAMETER |
500 (mm) |
| HEAT EXCHANGER HTA |
2(m2) |
| FEED AMOUNT |
80~240 (L/h) |
| VACUITY |
50mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
| FLOOR AREA |
length*width*height=1200*800*2500 (mm)(without pump) |
| POWER |
0.5KW (without vacuum pump) |
| VOLTAGE |
220V-60HZ |
Solvents, which are used for the cleaning of spray guns & tools, are very expensive. These solvents can be effectively recycled to reduce the production costs and avoid major disposal costs.
The Solvent Recovery Machines make it possible to restore & reuse the solvents for an almost endless number of times, for the cleaning application. By means of a simple distillation process the original nature of the used solvents is restored by separating from the polluting substances such as paints, resins, inks, oils, greases, etc. The regenerated solvents are then collected outside the Solvent Recovery Machine and forwarded to their next application. The polluting substances remain, as distillation residues, in a heat resistant plastic bag and depending on their composition, will be sent as inert materials, in maximum concentration condition, to special companies for further treatments.
Product Tags:
|
|
Vaccum Solvent Recovery Machine / Solvent Recovery Distillation Units Room Temp 200 ℃ Images
|
